[hpsdr] Run this test for me, and see if I have a problem, or HPSDR has one, or FlexRadio has one

[David McQuate]

PowerSDR / OpenHPSDR v2.2.3 (W5WC - 2/10/12) ----
When I do as you suggest, I can tune only up to 1.005 MHz, no higher.

If I then jump to a higher frequency, either by right click, then left 
click on a higher frequency,
or by directly entering a new frequency, say   2 <enter>, mouse wheel 
increases in frequency are limited
to two click--so in the last case, I can go only to 2.010 MHz.

If, instead, I click the 80m band button, tuning becomes normal--no limits.
73,
Dave
wa8ywq

On 2/16/2012 11:18 AM, Bob Mahrenholz wrote:
> ***** High Performance Software Defined Radio Discussion List *****
>
> Hi,
>
> 1, Tune Mercury to 2.000MHz.
> 2. Set TUNE STEP to 5kHz step size.
> 3. Now tune down to 0.900MHz using the mouse wheel.
> 4. Now tune back up to 2.000MHz using the mouse wheel.
> 5. Will it go?
> 6. Let me know.
>
> Mine won't go up past 1.005MHz. Anyone else have this problem? It only 
> does it with OpenHPSDR 2.x.x.; OpenHPSDR 1.x.x. works like it should.
> OpenHPSDR 2.x.x is where the additional step sizes were added!
>
>
> Thanks,
> Bob
> K4QQK
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: 
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
>


 1329433033.0