[hpsdr] Mic on Pennylane doesn't work after upgrading Firmwareto V1.7

[Chris 4X1RF]

Hi Phil, HPSDR,

I had the same versions warning with George's latest KK 1.1.12.0 yesterday
and solved it by replacing the Ozy_Janus.v22.rbf distributed with KK with
the one from the latest W5WC distribution.

After upgrading to Penny 1.7 and Mercury 3.2 (Magister here) my microphone
is not working anymore, both in W5WC and KK. Probably I should revert the
boards to the previous versions just to make sure.


73s
Chris 4X1RF


On Sun, Jul 8, 2012 at 12:50 PM, Phil Harman <phil at pharman.org> wrote:

>   Bob,
>
> I’ve just done a new install of Metis V1.8, Mercury V3.2 (as far as I know
> there is no V3.3 as yet) and Penelope V1.7 and PowerSDR v2.2.3 (6/22/12)
> and the microphone works just fine.
>
> I can’t test this with George’s latest KK release since it gives and
> invalid versions warning.
>
> 73 Phil...VK6APH
>
>
>
>
>
>
>
>  *From:* Chris 4X1RF <chrisgomy at gmail.com>
> *Sent:* Sunday, July 08, 2012 1:06 AM
> *To:* hpsdr at lists.openhpsdr.org
> *Subject:* Re: [hpsdr] Mic on Pennylane doesn't work after upgrading
> Firmwareto V1.7
>
> ***** High Performance Software Defined Radio Discussion List *****
>
>  ------------------------------
> Hi Bob, HPSDR,
>
> Updated myself yesterday to the latest W5WC PSDR and all the boards to
> their respective latest versions, Mercury 3.3, Pennelope 1.7. My main use
> for the rig is WSPR for which is working just fine using the VAC. I recall
> the microphone was working with the Penny v1.6.
>
> Just checked now and you're right, the microphone is not working here
> either, same with the latest KK Unified 32bit.
>
>
> 73s
> Chris 4X1RF
>
>
>
> On Sat, Jul 7, 2012 at 7:10 PM, Bob Mahrenholz <bobm at edge.net> wrote:
>
>> ***** High Performance Software Defined Radio Discussion List *****
>>
>> Guys,
>>
>> Things were working great and I was getting ready to go on the air with
>> my new Munin 100W Amp.
>> But first, I wanted to upgrade PowerSDR to the latest 2.361. But after I
>> upgraded Pennylane to V1.7,
>> speaking into the mike no longer causes any RF output from Pennylane. In
>> TUNE, I get an output,
>> but not in MOX.
>>
>> Is there something I forgot to check or uncheck?
>>
>> Thanks,
>> Bob k4qqk
>> ______________________________**_________________
>> HPSDR Discussion List
>> To post msg: hpsdr at openhpsdr.org
>> Subscription help: http://lists.openhpsdr.org/**
>> listinfo.cgi/hpsdr-openhpsdr.**org<http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org>
>> HPSDR web page: http://openhpsdr.org
>> Archives: http://lists.openhpsdr.org/**pipermail/hpsdr-openhpsdr.org/<http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/>
>>
>
>
> ------------------------------
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help:
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20120708/3c995366/attachment-0004.htm>