[hpsdr] Receive Only

[Joe Martin K5SO]

Maybe you could run with Penelope selected in the hardware list even though Penelope sn't actually on the bus, in order to have access to the usual controls and I/O functions you need? 

Joe K5SO

On Mar 26, 2012, at 4:03 PM, Pat McGrath wrote:

> I do  not have Penelope.  An Icom 765 is used for transmit.
> 
> With this option gragyed out the HPDSR will not go in transmit mode.
> 
> 
> -----Original Message-----
> From: Joe Martin K5SO [mailto:k5so at valornet.com] 
> Sent: Monday, March 26, 2012 1:42 PM
> To: HPSDR list
> Subject: Re: [hpsdr] Receive Only
> 
> ***** High Performance Software Defined Radio Discussion List *****
> 
> Pat, 
> 
> The "Receive Only" control is grayed out when Penelope is not selected in
> the hardware setup.  The control becomes active if "Penelope" is checked as
> being present.  
> 
> 73,  Joe K5SO
> 
> 
> On Mar 26, 2012, at 2:35 PM, Pat McGrath wrote:
> 
>> ***** High Performance Software Defined Radio Discussion List *****
>> 
>> 
>> The "receive Only" box under Hardware Config in Powersdr is grayed out.
>> 
>> Prior editions  such as Powersdr 1.1.9.3 allowed the user to decide 
>> whether Receive only or not.
>> 
>> Can this option be restored?
>> 
>> Please help.
>> 
>> Pat McGrath
>> Ka6tya
> 
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help:
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
> 


 1332804540.0