[hpsdr] hpsdrprogrammer

[H.A.Meijer]

Hi,

I want to give my Hermes board a static IP address.
I use the HPSDR programmer ver. 1.6 and run with administrator
privileges and J12 is set, firewall=off
I can discover the board and I can program the firmware(1.8).
But I can't read/write the IP/MAC address.
The Hermes board runs normally, in DHCP mode.

Thanks
Bert/pa2xhf
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20121109/66ca359f/attachment-0003.htm>