[hpsdr] Programming fixed IP address in Hermes

[kb3omm]

Attempting to program a fixed IP address into Hermes. Following
instructions in Appendix A of Hermes Users Manual v1.9. but programmer does
not discover Hermes.

Using PC with two NICs and a straight Ethernet cable to interconnect.

PowerSDR and cuSDR discover and work fine.

Tried once with J12 off, and Programmer did discover, but could not do
anything of course, as Hermes not in boot loader mode.

Is it possible that the Ethernet cable needs to be a crossover for the boot
loader mode to work?

73, Kevin kb3omm
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20121123/aa5a8f22/attachment-0003.htm>