[hpsdr] Programming fixed IP address in Hermes

[Dave G4FRE]

Straight Ethernet cable has always worked fine for me

 

Dave

 

Ww2r

 

From: hpsdr-bounces at lists.openhpsdr.org
[mailto:hpsdr-bounces at lists.openhpsdr.org] On Behalf Of kb3omm
Sent: Friday, November 23, 2012 9:04 PM
To: hpsdr at lists.openhpsdr.org
Subject: [hpsdr] Programming fixed IP address in Hermes

 

Attempting to program a fixed IP address into Hermes. Following instructions
in Appendix A of Hermes Users Manual v1.9. but programmer does not discover
Hermes. 

Using PC with two NICs and a straight Ethernet cable to interconnect.

PowerSDR and cuSDR discover and work fine. 

Tried once with J12 off, and Programmer did discover, but could not do
anything of course, as Hermes not in boot loader mode. 

Is it possible that the Ethernet cable needs to be a crossover for the boot
loader mode to work?

73, Kevin kb3omm

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20121123/18e2cd1f/attachment-0004.htm>