[hpsdr] Programming fixed IP address in Hermes

[H.A.Meijer]

Hi,

I made the same observation with my Hermes board, it did not want to 
switch to the boot loader mode with J12.
To solve this I had to program the boot loader software to the eeprom 
with a usb-blaster programmer using  quartus II.
It seems that someone forgot to program the bootloader to the eeprom at 
production.

Bert PA2XHF


Op 24-11-2012 4:04, kb3omm schreef:
> ***** High Performance Software Defined Radio Discussion List *****
>
>
>
> Attempting to program a fixed IP address into Hermes. Following 
> instructions in Appendix A of Hermes Users Manual v1.9. but programmer 
> does not discover Hermes.
>
> Using PC with two NICs and a straight Ethernet cable to interconnect.
>
> PowerSDR and cuSDR discover and work fine.
>
> Tried once with J12 off, and Programmer did discover, but could not do 
> anything of course, as Hermes not in boot loader mode.
>
> Is it possible that the Ethernet cable needs to be a crossover for the 
> boot loader mode to work?
>
> 73, Kevin kb3omm
>
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20121124/a3144fbc/attachment-0004.htm>