[hpsdr] PowerSDR mRX-FFT calibration issue v3.0.7

[a.groff]

Dale,
   I agree, the manual correction factor no longer does anything with 
PSDR 3.0.8 when used with Excaliber.
It did work with PSDR 2.x although it was somewhat granular.  With 2.x 
it displays lots of resolution that can not be used and
only responds to changes larger than 1.0000001. Which results in 300-500 
millihertz (??? ) steps.

AL, K0VM



On 4/16/2013 4:06 PM, hpsdr-request at lists.openhpsdr.org wrote:
> Date: Tue, 16 Apr 2013 11:49:38 -0400 (EDT)
> From:"dmb at lightstream.net"  <dmb at lightstream.net>
> To: "Willi Reppel"<wi.re at telia.com>
> Cc:hpsdr at openhpsdr.org
> Subject: Re: [hpsdr] PowerSDR mRX-FFT calibration issue v3.0.7
> Message-ID:
> 	<50346.76.190.226.102.1366127378.squirrel at mail.expedient.net>
> Content-Type: text/plain;charset=iso-8859-1
>
> Hi Willi,
>
> Yes, I know that there used to be one that would allow one to zero beat
> WWV, but the only one that I see now is the one labelled "Correction
> Factor" in the "HPDSR Freq Cal Diagnostic" panel on Setup > General >
> Calibration. That value changes as a result of running the Freq Cal, but
> it doesn't do anything when changing it manually.
>
> Is that the control that you're referring to, or is there another one
> located somewhere else?
>
> Thanks,
> Dale  WA8SRA


 1366208347.0