[hpsdr] Munin photo wanted

[John]

Thanks Don.  You photos have given me confidence.  I'm trying not to 
mess anything up.

73,

John  WoGN

At 05:40 PM 8/30/2013, dlwaddel at netzero.net wrote:
>John,
>
>The photos are not very good, but all I did was bend the two outer 
>leads toward the center until they just reached the pads. I used the 
>center lead as is and soldered it to the center pad. I then soldered 
>the outer leads to their pads.
>
>Don
>K3DLW
>
>Message: 9
>Date: Fri, 30 Aug 2013 10:57:59 -0500
>From: John <radio at mediacombb.net>
>To: hpsdr at lists.openhpsdr.org
>Subject: [hpsdr] Munin photo wanted
>Message-ID: <20130830155805.C34B7483C6 at diego.dreamhost.com>
>Content-Type: text/plain; charset="us-ascii"; format=flowed
>
>
>
>Can somebody send me a photo showing how the ten turn bias pots are
>mounted to the Munin board?
>
>Thanks.
>
>John,  WoGN
>



 1377956896.0