[hpsdr] SOLVED Tapr hombrew hermes shutdown problem

[Oliver Goldenstein]

Hi Stijn !

Many thanks for your information. That helped indeed.

You're right. Checking the BOM is not an easy process. On the other hand
you can learn a lot. I did :-)

Thanks for checking the fuses.

73 Oliver DL6KBG
Am 20.02.2013 12:57 schrieb "Stijn Nestra" <stijn at pe1rks.nl>:

> ***** High Performance Software Defined Radio Discussion List *****
>
>
> Hi Oliver,
>
> On my TAPR build Hermes the fuses are:
>
> F1: Bourns MF-MSMF050 / 500mA hold current 15V max
> F2: BellFuse 0ZCC0160BF2C / 1,6A hold current 16V max
> F3: BellFuse 0ZCC0300FF2B / 3A hold current / 6V max
>
> I hope this helps.
>
> 73 Stijn PE1RKS
>
> ps. I must say that it is pretty hard to build your own Hermes board, I am
> also in the process to build my own. The big problem is that there is no
> correct BOM. Parts are missing or simply the wrong value or wrong part
> number.
>
> Op 19-02-13 22:17, Oliver Goldenstein schreef:
>
>> ***** High Performance Software Defined Radio Discussion List *****
>>
>>
>>
>>
>>
>>     Puh....i replaced F3 by  a 2 A fuse i had in the box and the board
>>     is now alive since one hour. Programmed the new Firmware with
>>     HPSDRProgrammer V2.
>>
>>     Many thanks Phil!
>>
>>     I learned a lot in understanding those fuses by the bourns whitpapers:
>>
>>     http://www.bourns.com/**multifuse/ <http://www.bourns.com/multifuse/>
>>
>>     It could be that the fuse was active before. With every use the trip
>>     current gets lower.
>>
>>     So good to know to have something on board that works so well :-)
>>
>>     I ordered some fuses 2 / 2,5 / 3 Ampere hold current.
>>
>>     Is it suggested to replace F1, F2 by the 2 A and F3 by the 3 A one ?
>>     The schematic shows 2 A (hold current) for all three?
>>
>>     73 Oliver DL6KBG
>>
>>
>>
>> ______________________________**_________________
>> HPSDR Discussion List
>> To post msg: hpsdr at openhpsdr.org
>> Subscription help: http://lists.openhpsdr.org/**
>> listinfo.cgi/hpsdr-openhpsdr.**org<http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org>
>> HPSDR web page: http://openhpsdr.org
>> Archives: http://lists.openhpsdr.org/**pipermail/hpsdr-openhpsdr.org/<http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/>
>>
>>  ______________________________**_________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/**
> listinfo.cgi/hpsdr-openhpsdr.**org<http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org>
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/**pipermail/hpsdr-openhpsdr.org/<http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20130220/ab8e68e4/attachment-0003.htm>