[hpsdr] Mercury Problem
steve at coastaldatasystems.com
Sat Jan 26 13:22:45 PST 2013
I have found that the ADC is 90 degrees off, mine has marks on two corners
but under a magnifying glass it's obvious I picked the wrong one. I didn't
even see the other.
From: hpsdr-bounces at lists.openhpsdr.org
[mailto:hpsdr-bounces at lists.openhpsdr.org] On Behalf Of Stephen West-Fisher
Sent: Saturday, January 26, 2013 3:11 PM
To: hpsdr at lists.openhpsdr.org
Subject: [hpsdr] Mercury Problem
***** High Performance Software Defined Radio Discussion List *****
I've just finished building Mercury, and while I didn't expect it to work
right off I don't know where to start the troubleshooting.
I loaded V3.2 firmware with no errors.
I uninstalled my old PowerSDR and installed 2Rx v2.2.9 even though I have
only the one Mercury.
When I hit the power button with Mercury selected in setup PowerSDR locks
up. If I de-select Mercury it runs fine.
I recall some discussion recently about software/firmware version issues but
I cannot find it searching the list or on the openhpsdr site. Could someone
point me to some current documentation about it?
While I didn't really expect the board to work first time, I did not expect
it to lock up PoswerSDR, just to not work. Could this be from a hardware
issue? If so, where should I start looking for errors on the board?
HPSDR Discussion List
To post msg: hpsdr at openhpsdr.org
HPSDR web page: http://openhpsdr.org
More information about the Hpsdr