[hpsdr] Setting up your Apache Labs ANAN 100D to work on AM/SSB, Digi Modes and SKYPE, with same powered speakers and same Microphone.

[K4LCD]

Hi friends!

Running Windows 7, 64bits OS; OpenHPSDR's PowerSDR mRX-FFT v.3.1.5; 
Transceiver: Apache Labs ANAN-100D

The following are my settings:

Desk top Microphone connected to Front mic jack *at computer.*
Powered speakers connected to Front earphone *j**ack at computer. *

To work in (SKYPE) and SSB/AM...,  the following settings apply:
*
**VAC 1****Input: Front Mic.*
VAC 1    Output: Line 3 *(prepared for Digital modes).*
On sound card: Playback Line IN Level must have some output, and Realtek 
HD Audio Output Level controls the input level to powered speakers, in 
order to hear the sound from RX1 and RX2.

To work FLdigiand other digital modes:
*/
/**/VAC 1 Input: must be changed: From Front Mic to Line 2 (VAC 2 
Output:) so it will transmit only when you wish to operate on digimodes./*
VAC 1 Output: Line 3 (previously set up for digital modes).

VAC 2 Input: Line 3 (set as Capture in FLdigi).
VAC 2 Output: *Line 2* (set as Playback in FLdigi).

On AM/SSB, PPT is activated by ON pressing/releasing and OFF by again 
pressing releasing keyboard SPACEBAR.

Now it all works, Radio, SSB, Digital Modes, both receivers and Skype, 
with same microphone and same speakers!

With regards to all and 73

Juan /K4LCD
http://groups.yahoo.com/group/sdr-users/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20130721/83a93859/attachment-0002.htm>