[hpsdr] ghpsdr3-alex on the Anan 100D

[Sid Boyce]

I am using my SDR gear including Hermes with ghpsdr3-alex behind a cable 
router and an IPFire firewall box.

You have to configure the firewall to forward port 8000 to the box that 
is running the servers.

In the router I am using IP Forwarding of ports 8000 - 8004 and 9000 - 
9004 to the box running
"hpsdr-server  --hermes 0 --samplerate 96000" and "dspserver --lo 0  
--hpsdr --nocorrectiq".
73 ... Sid.

On 03/06/13 01:59, David R. Wilson wrote:
> ***** High Performance Software Defined Radio Discussion List *****
>
> Hello Fellows,
>
> I am not quite there.  It seems the firewall I am using (that does other
> things) is blocking port 8000.  Once you have qtradio functional, and
> the 100D is on the local network, is there a way to point directly to
> the local address (behind the firewall) for the 100D?
>
> I don't know yet how much of this installation is working.
>
> Dave
> KU4B
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>


-- 
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks


 1370249393.0