[hpsdr] request PowerSDR feature

[Ron Kolarik]

John just pick up a cheap scanner and use that for band openings.
I normally have the radio on 50.125 and let the scanner run from 
about 45Mhz to 53Mhz. That usually catches everything of interest.

Ron
K0IDT
_____________________________________________________
Original Message
Mon, 10 Jun 2013 06:58:24 -0500
From: John <radio at mediacombb.net>
To: HPSDR <hpsdr at openhpsdr.org>
Subject: [hpsdr] request PowerSDR feature
Message-ID: <51B5BF60.806 at mediacombb.net>

After operating in the ARRL VHF contest on six meters this last weekend 
I have been wondering if an added feature to PowerSDR would be useful 
(and practical).  It seems to me there is a lot more CW operation on 6 
meters than there used to be and when conditions are poor a lot of guys 
run CW.

Could the software have an option to tune the receiver to the frequency 
of the strongest signal as shown in the panoramic display?  That way I 
could turn the volume up and do other things around the house.  When the 
band was open and CW signals were coming through I could hear them and 
quickly run to the radio.

73,   John  WoGN

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20130610/f07c653a/attachment-0003.htm>