[hpsdr] external 10MHz reference input

[John Ackermann N8UR]

Actually, TADD-2 and TADD-3 serve different purposes -- TADD-2 (and the 
single-channel TADD-2 Mini) will divide a 1/5/10 MHz source down to one 
pulse per second while the TADD-3 is a pulse distribution device -- six 
PPS outputs for one or two PPS inputs, with no divider capability.

TADD-1 is a 6-channel RF distribution amplifier.  At the moment only the 
PCB is available because the original amplifier chip (MAX477) has become 
unobtanium.  We are told that there are other op-amps that can be 
dropped in as replacements, but haven't done testing ourselves.

73,
John

On 5/22/2013 4:55 PM, George Byrkit wrote:
> ***** High Performance Software Defined Radio Discussion List *****
>
> Checking the TAPR website (that might seem obvious?), you can see that the TADD-1 circuit
> board is available, and that the TADD-3 seems to have replaced the TADD-2, and is
> available as a full kit.
>
> Of course since you are likely in the UK, a kit from the UK might be better suited, as the
> previous poster has pointed out.
>
> 73,
> George K9TRV
> TAPR board member
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>

 1369259095.0