[hpsdr] Hermes/ANAN-10 Tune Power

[Warren C. Pratt]

Hi John,

You are correct on both of these.

73,
Warren  NR0V


-----Original Message-----
From: hpsdr-bounces at lists.openhpsdr.org
[mailto:hpsdr-bounces at lists.openhpsdr.org] On Behalf Of John Ackermann
Sent: Sunday, May 26, 2013 8:38 AM
To: HPSDR List
Subject: [hpsdr] Hermes/ANAN-10 Tune Power

***** High Performance Software Defined Radio Discussion List *****

In the TX tab (using the latest mRX version) the tune power setting seems to
be indicated in watts but it appears to be a percentage of drive level --
e.g., setting to "50" should yield 5W output given 10W from the ANAN-10 at
full drive.  Is it correct that I should ignore the "(W)" indication and
view it as a percentage of full power?

Also, it appears that the tune power is independent of the drive level
setting on the main screen.  Is that correct?

Thanks,

John
_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at openhpsdr.org
Subscription help:
http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
HPSDR web page: http://openhpsdr.org
Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/


 1369626068.0