[hpsdr] Dumb Questions

[Owen, Michael]

FWIW, I have a new production Angelia and its power connector points "up" perpendicular to the board.
W9IP
-----Original Message-----
From: hpsdr-bounces at lists.openhpsdr.org [mailto:hpsdr-bounces at lists.openhpsdr.org] On Behalf Of Joe Martin K5SO
Sent: Wednesday, April 16, 2014 11:35 AM
To: Warren Ziegler
Cc: hpsdr at lists.openhpsdr.org
Subject: Re: [hpsdr] Dumb Questions

***** High Performance Software Defined Radio Discussion List *****

Hi Warren,

1) I have a prototype Angelia board in a Hermes enclosure so the basic board size fits but the production Angelia boards use a right angle power connector that does not allow the production boards to slide into the Hermes enclosure.  Without modifying the power connector you cannot use the Angelia board in a Hermes enclosure.  The prototype Angelia board used a vertical power connector, unlike the right angle power connector on the production Angelia boards.

2) Yes.

3) Yes.

73, Joe K5SO

On Apr 16, 2014, at 9:26 AM, Warren Ziegler wrote:

> ***** High Performance Software Defined Radio Discussion List *****
>
> I am considering ordering an Angelia board, but have some questions:
> 1) Does it fit in the Hermes enclosure?
> 2) Will Puresignal work with Angelia hardware?
> 3) Does the VNA software work with Angelia?
>
> Thanks for the bandwidth!
>
>
> --
> 73 Warren K2ORS
>                 WD2XGJ
>                 WD2XSH/23
>                 WE2XEB/2
>                 WE2XGR/1

_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at openhpsdr.org
Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
HPSDR web page: http://openhpsdr.org
Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
This message is intended only for the addressee and may contain information that is company confidential or privileged. Any technical data in this message may be exported only in accordance with the U.S. International Traffic in Arms Regulations (22 CFR Parts 120-130) or the Export Administration Regulations (15 CFR Parts 730-774). Unauthorized use is strictly prohibited and may be unlawful. If you are not the intended recipient, or the person responsible for delivering to the intended recipient, you should not read, copy, disclose or otherwise use this message. If you have received this email in error, please delete it, and advise the sender immediately.

 1397663923.0