[hpsdr] Dumb Questions

[Owen, Michael]

Joe-

I am expecting front/back panels back from FrontPanelExpress<http://www.frontpanelexpress.com/> any day now.  If my measurements were good, the panels ought to be nice and  I'll post the design files.

W9IP

From: Joe Martin K5SO [mailto:k5so at valornet.com]
Sent: Wednesday, April 16, 2014 2:02 PM
To: Owen, Michael
Cc: Warren Ziegler; hpsdr at lists.openhpsdr.org
Subject: Re: [hpsdr] Dumb Questions

Michael, Warren,

The Hammond 1455Q enclosure is what I use here (from DigiKey) for my Angelia board, and that's what I've been calling the Hermes enclosure (perhaps inappropriately).  My picoPSU fit without requiring any grinding, but I notice that some of the later picoPSUs have two larger caps on the side now that make them a bit wider than the earlier versions so perhaps that's what you have.  I did grind a portion of a few of the internal rails near P1 and P2 to make it easier to plug and unplug blaster cables.

73, Joe K5SO

On Apr 16, 2014, at 11:48 AM, Owen, Michael wrote:


Joe-

My Angelia was purchased stand-alone.  I can't vouch for it fitting in a Hermes enclosure because I don't have one, but Angelia + PicoPSU does fit in a Hammond 1455Q<http://www.hammondmfg.com/pdf/1455Q1601.pdf>. It is a tight fit, however.  The outside of the PicoPSU is just a couple of millimeters too wide.  I had to grind some slot rails off the inside end of the Hammond enclosure.

W9IP


This message is intended only for the addressee and may contain information that is company confidential or privileged. Any technical data in this message may be exported only in accordance with the U.S. International Traffic in Arms Regulations (22 CFR Parts 120-130) or the Export Administration Regulations (15 CFR Parts 730-774). Unauthorized use is strictly prohibited and may be unlawful. If you are not the intended recipient, or the person responsible for delivering to the intended recipient, you should not read, copy, disclose or otherwise use this message. If you have received this email in error, please delete it, and advise the sender immediately.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20140416/4a46de98/attachment-0004.htm>