[hpsdr] [apache-labs] Re: Angelia_v2.5 and PowerSDR_mRX_PS_RA v3.2.8 (1Feb2014)

[mstangelo at comcast.net]

Paul,

I'm weary about downgrading code. The programmer locks up and I have to use the bootloader.

Maybe one of the developers cold examine the code to see if there are any differences in the LPF selection.

Abhi,

Can you check your ANAN-100D with Angelia_v2.5 and PowerSDR_mRX_PS_RA v3.2.8 (1Feb2014?

Mike N2MS
----- Original Message -----a
From: Paul Baron <paul.baron at uwclub.net>
To: apache-labs at yahoogroups.com.
Sent: Mon, 03 Feb 2014 19:14:18 -0000 (UTC)
Subject: RE: [apache-labs] Re: [hpsdr] Angelia_v2.5 and PowerSDR_mRX_PS_RA v3.2.8 (1Feb2014)

Hi Paul,

 

Originally when I got my Anan 100D the PA Calibrated was ok but after
upgrades it is now showing low power, but I couldn't point to any

 

Particular upgrade. Maybe I should revert back to 1.9 firmware and the
original software and try that when I get the time.

 

Regards

 

Paul  G2PB 

 

From: apache-labs at yahoogroups.com [mailto:apache-labs at yahoogroups.com] On
Behalf Of gi4fzd
Sent: 03 February 2014 18:51
To: apache-labs at yahoogroups.com
Subject: [apache-labs] Re: [hpsdr] Angelia_v2.5 and PowerSDR_mRX_PS_RA
v3.2.8 (1Feb2014)

 

  

Hi Mike,
I tend to agree but i suppose it's worth a try to eliminate it completely,
I did not notice this when i did the original pa calibration
when i first received the 100D, I am sure I would have picked it up at that
time.

Cheers
paul
GI4FZD

--- In apache-labs at yahoogroups.com, mstangelo at ... wrote:
>
> Abhi,
> 
> I can get 100 watts out on 6 meters so I don't believe gain variance of
the RD100HF1 has anything to do with this problem!
> 
> Mike N2MS
> ----- Original Message -----
> From: abhiarunoday16 at ...
> To: apache-labs at yahoogroups.com
> Sent: Mon, 03 Feb 2014 16:26:18 -0000 (UTC)
> Subject: Re: [apache-labs] Re: [hpsdr] Angelia_v2.5 and PowerSDR_mRX_PS_RA
v3.2.8 (1Feb2014)
> 
> Hi Mike,
> 
> setting Alex to manual forces use of the 17/15M LPF on 12M as you
correctly pointed out, the 10M power issue is to do with the gain variance
of the RD100HHF1 from batch to batch, no changes have been made to the
filter design,
> 
> 73s,
> Abhi
>