[hpsdr] ANAN-100D 10m power output

[Peter (G1FXE)]

Joe,

Just to add to the confusion. When I tried v2.7 I could barely achieve 75-80
watts  on 160-17metres, on 15-10metres I got 98-100watts.
All spinners (all bands) were at their bottom most values.

For the moment I've gone back to v2.2 where I get a good range of adjustment
& full power across all bands. I'll endeavour to try v2.8 today and post my
findings.

Peter (G1FXE)
 
 
 
 
-------Original Message-------
 
From: Joe Martin K5SO
Date: 09/02/2014 03:41:06
To: mstangelo at comcast.net
Cc: hpsdr at lists.openhpsdr.org list
Subject: Re: [hpsdr] ANAN-100D 10m power output
 
***** High Performance Software Defined Radio Discussion List *****
 
Hi Mike,
 
I’m confused by your request.
 
1) I am using v2.8
 
2) If you raise the spinner setting you’ll lower the output power, not
increase the output power.
 
It’s puzzling to me why you aren’t able to get 100W with the setting of 41.5
  I’ll go ahead and test with higher spinner settings but it should decrease
the output power if it’s working properly, which I believe is was because
when I initially started my spinner setting was in the 44 range, giving me
an output of about 88 watts.  The power increased (as expected) when I
lowered the setting to 41.5, giving me 100W out.
 
Joe K5SO
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20140209/6680e0ec/attachment-0004.htm>