[hpsdr] test Angelia v3.9

[mstangelo at comcast.net]

Joe,

I'm curious; what was the cause of the power difference between v2.7 and v2.8?

Mike N2MS
----- Original Message -----
From: Joe Martin K5SO <k5so at valornet.com>
To: mstangelo at comcast.net
Cc: leskep at skymesh.com.au, hpsdr at lists.openhpsdr.org list <hpsdr at lists.openhpsdr.org>
Sent: Sun, 09 Feb 2014 21:53:59 -0000 (UTC)
Subject: Re: test Angelia v3.9

Mike, 

Well that’s a bummer.  I thought we had something here with this filter switching “fix” that would cure your problem but it may be that filter switching isn’t the culprit with your unit after all.  It’s interesting that most other folks don’t seem to have that problem; I sure don’t here. 

I’ll have to think on it some more I guess.  Thanks for the tests.

73,  Joe K5SO

On Feb 9, 2014, at 2:49 PM, mstangelo at comcast.net wrote:

> Joe,
> 
> With test versions v3.9 I get 75 watts out on 10M with the lowest PA spinner setting of 41.5. I got the same results with the previous test v3.7 and 3.8 code.
> 
> Mike N2MS
> ----- Original Message -----
> From: mstangelo at comcast.net
> To: Joe Martin K5SO <k5so at valornet.com>
> Cc: leskep at skymesh.com.au
> Sent: Sun, 09 Feb 2014 18:09:54 -0000 (UTC)
> Subject: Re: test Angelia code_1
> 
> Joe,
> 
> With test versions v3.7 and v3.8 in get 75 watts out on 10M with the lowest PA spinner setting of 41.5. I got the same results with v2.8.
> 
> I also retried v3.7 and can get 100 watts out on 10M with a spinner setting of 43. However, as you observed, the power output is not steady and fluctuates when you hit TUN. I also hear a whining with the fluctuation on 6M.
> 
> I could switch between all 4 programs with the HPSDR Programmer.
> 
> Mike N2MS
> 
> ----- Original Message -----
> From: Joe Martin K5SO <k5so at valornet.com>
> To: leskep at skymesh.com.au, Michael St. Angelo <mstangelo at comcast.net>
> Sent: Sun, 09 Feb 2014 05:47:18 -0000 (UTC)
> Subject: test Angelia code_1
> 
> Les and Mike, 
> 
> I would appreciate it if you would test these two versions of Angelia code for me to see how they work for you on 10m Tx.  Both give me 101W output on 10m and look just fine on my 100D.  They load fine using HPSDR Programmer.  
> 
> Thanks! 
> 
> 73,  Joe K5SO
> 
> 



 1391983207.0