[hpsdr] Fwd: PowerSDR mRX questions

[Jim Sanford]

All:
Hoping for some help on the below questions, especially getting transmit 
audio working.  Just realized that my message-sorting filters were kind 
of messed up, may have lost some messages.

Thanks & 73,
Jim
wb4gcs at amsat.org



-------- Original Message --------
Subject: 	[hpsdr] PowerSDR mRX questions
Date: 	Sat, 05 Jul 2014 23:16:18 -0400
From: 	Jim Sanford <wb4gcs at wb4gcs.org>
Reply-To: 	wb4gcs at amsat.org
To: 	hpsdr at openhpsdr.org



***** High Performance Software Defined Radio Discussion List *****

All:
Upgraded the firmware, and installed PowerSDR_mRX_PS_v3.2.17.0.  It
appears to work, hears very well.

I have some questions.
1.  This thing uses a lot more CPU resources than the older version I
had installed.  Are others seeing this?  I'm running Win7 Home Premium
32-bit on 1.87 GHz Intel Atom with 4GB of RAM and 238GB solid state disk
drive -- 200 GB free.
2.  ANR and ANF introduce tremendous distortion.  Checked settings,
their gain defaults to 100.  What settings are people using for these
functions?
3.  Where is the PREAMP switch?
4.  HPSDR QuickStart refers to a Flex manual, which seems a bit long in
the tooth -- many differences between text and current software. Is
there a more recent manual somewhere?
5.  Finally, my biggest question:  When I try to transmit, there is no
audio, no RF output.  I hear nothing when I turn on Monitor. Yet, TUNE
and the 2-tone Test DO result in RF output.  Obviously, jumpers are set
properly for PTT.  I verified set Mic and Mic bias to the other
terminal.  I have verified that my microphone IS expectding to see bias
from the radio.  I have verified my microphone works with my IC-910 and
other Icom radios.  I have enabled the 20db Mic Boost, to no avail.  Any
suggestions??

Thanks & 73,
Jim
wb4gcs at amsat.org


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com

_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at openhpsdr.org
Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
HPSDR web page: http://openhpsdr.org
Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/





---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20140707/4fd14534/attachment-0002.htm>