[hpsdr] Bootloader issues

[Joe Martin]

…and, of course, in 6) too: 

"6) did you power cycle the Atlas bus before running HPSDR Bootloader? "

You should be using the BOOTLOADER program, not the PROGRAMMER program, to program your Mercury and Penelope boards through Metis.

73, Joe K5SO

On Apr 19, 2015, at 8:39 AM, Joe Martin wrote:

> ***** High Performance Software Defined Radio Discussion List *****
> 
> In 7) below I meant to say:
> 
> 7) when you run HPSDR Bootloader do you see “Ethernet1" or “Ethernet2” in the “Interface:” window in the “Computer Interface” section of the display? 
> 
> 73, Joe K5SO
> 
> 
> On Apr 19, 2015, at 8:34 AM, Joe Martin wrote:
> 
>> ***** High Performance Software Defined Radio Discussion List *****
>> 
>> John, 
>> 
>> Just to be clear about your setup/procedure, deal with Mercury first and check that all of these can be answered by “Yes”, please:
>> 
>> 1) do have the “Last JTAG” jumper installed on your Mercury target board?
>> 
>> 2) do you have JP1 installed on Metis? 
>> 
>> 3) do you have only Metis and the Mercury board on the Atlas bus? 
>> 
>> 4) do you have the Metis and Mercury board adjacent to each other on the Atlas bus? 
>> 
>> 5) do you have the Mercury board located between Metis and the power connector on the Altas board? 
>> 
>> 6) did you power cycle the Atlas bus before running HPSDR Programmer? 
>> 
>> 7) when you run HPSDR Programmer do you see “Ethernet1" or “Ethernet2” in the “Interface:” window in the “Computer Interface” section of the display? 
>> 
>> 8) when you “Interogate” the target board do you see “TAPR - Mercury - 00x020F30” next to the “Interogate” label, under the “Use board as a JTAG Programmer” section of the display? 
>> 
>> If you cannot answer “Yes” to all, which are yes and which are no, please?  
>> 
>> If one step in the update procedure fails to execute normally, exit HPSDR Bootloader and start fresh; i.e., don’t simply re-click the buttons on the HPSDR Bootloader display, power cycle Atlas and start HPSDR Bootloader up fresh to try again. 
>> 
>> 73, Joe K5SO
>> 
>> 
>> On Apr 19, 2015, at 7:39 AM, John Ackermann N8UR wrote:
>> 
>>> ***** High Performance Software Defined Radio Discussion List *****
>>> 
>>> Well, no joy.  I checked and winpcap is installed on the system, so that's not the issue.
>>> 
>> 
>> _______________________________________________
>> HPSDR Discussion List
>> To post msg: hpsdr at openhpsdr.org
>> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
>> HPSDR web page: http://openhpsdr.org
>> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>> 
> 
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20150419/587513bd/attachment-0003.htm>