[hpsdr] Bootloader issues

[Joe Martin]

Okay, thanks.  Do you happen to have a USB Blaster cable to reload Metis flash memory directly using the Quartus II programmer utility?  

73, Joe K5SO

On Apr 19, 2015, at 1:10 PM, John Ackermann N8UR wrote:

> Sorry I wasn't clear -- I have two NICs in the machine and have selected the one that is on the same ethernet segment as the Metis.  What I meant below was that I assumed "Local Area Connection" was equivalent to "Ethernet" in the message.  I am selecting the proper one.
> 
> 73,
> John
> 
> On 04/19/2015 02:14 PM, Joe Martin wrote:
>> 
>> On Apr 19, 2015, at 11:57 AM, Joe Martin wrote:
>> 
>>>>>> 
>>>>>> 7) when you run HPSDR Programmer do you see “Ethernet1" or
>>>>>> “Ethernet2” in the “Interface:” window in the “Computer Interface”
>>>>>> section of the display?
>>>>> 
>>>>> I get "Local Area Network 1" or "Local Area Network 2" -- assume
>>>>> that's the same thing.  It shows the local machine MAC and IP address.
>>> 
>> 
>> Glenn,
>> 
>> No, they aren’t the same thing.  They are two different ethernet ports.
>>  You must be sure that your Metis is plugged into one or the other
>> (either directly or via an ethernet switch) and select that ethernet
>> port in the HPSDR Bootloader menu that shows the ethernet connections
>> that are available on your PC.  If you choose the wrong one Metis can’t
>> talk to the PC.  Try the other one, as a test, if you are unsure about
>> which to use.
>> 
>> 73, Joe K5SO
>> 
>> 
>> 
> 


 1429492658.0