[hpsdr] Bootloader issues

[John Ackermann N8UR]

Sorry I wasn't clear -- I have two NICs in the machine and have selected 
the one that is on the same ethernet segment as the Metis.  What I meant 
below was that I assumed "Local Area Connection" was equivalent to 
"Ethernet" in the message.  I am selecting the proper one.

73,
John

On 04/19/2015 02:14 PM, Joe Martin wrote:
>
> On Apr 19, 2015, at 11:57 AM, Joe Martin wrote:
>
>>>>>
>>>>> 7) when you run HPSDR Programmer do you see “Ethernet1" or
>>>>> “Ethernet2” in the “Interface:” window in the “Computer Interface”
>>>>> section of the display?
>>>>
>>>> I get "Local Area Network 1" or "Local Area Network 2" -- assume
>>>> that's the same thing.  It shows the local machine MAC and IP address.
>>
>
> Glenn,
>
> No, they aren’t the same thing.  They are two different ethernet ports.
>   You must be sure that your Metis is plugged into one or the other
> (either directly or via an ethernet switch) and select that ethernet
> port in the HPSDR Bootloader menu that shows the ethernet connections
> that are available on your PC.  If you choose the wrong one Metis can’t
> talk to the PC.  Try the other one, as a test, if you are unsure about
> which to use.
>
> 73, Joe K5SO
>
>
>

 1429470655.0