[hpsdr] Bootloader issues

[John Ackermann N8UR]

Excellent, thanks Joe!

I won't have time mess further with this for a couple of weeks, but I'll 
let you know how it goes.

73 and thanks for all the help!

John

On 4/19/2015 10:35 PM, Joe Martin wrote:
> You can get the programmer here:
>
> http://dl.altera.com/?product=qprogrammer#tabs-4
>
> under the “Stand-Alone Software” check the “Quartus II Programmer and Tools” box.
>
> 73, Joe K5SO
>
> On Apr 19, 2015, at 8:30 PM, Joe Martin wrote:
>
>> ***** High Performance Software Defined Radio Discussion List *****
>>
>> You need only download the Quartus II programmer to do what you need, not the full Quartus II development package (unless you want the whole thing).
>>
>> 73, Joe K5SO
>>
>> On Apr 19, 2015, at 7:41 PM, John Ackermann N8UR wrote:
>>
>>> Hi Joe -- Yes, I have a couple of Blasters.  Does this still require loading the whole Quartus suite, or can you just use the generic programmer software?
>>>
>>>
>>>> On Apr 19, 2015, at 9:17 PM, Joe Martin <k5so at k5so.com> wrote:
>>>>
>>>> Okay, thanks.  Do you happen to have a USB Blaster cable to reload Metis flash memory directly using the Quartus II programmer utility?
>>>>
>>>> 73, Joe K5SO
>>>>
>>>>> On Apr 19, 2015, at 1:10 PM, John Ackermann N8UR wrote:
>>>>>
>>>>> Sorry I wasn't clear -- I have two NICs in the machine and have selected the one that is on the same ethernet segment as the Metis.  What I meant below was that I assumed "Local Area Connection" was equivalent to "Ethernet" in the message.  I am selecting the proper one.
>>>>>
>>>>> 73,
>>>>> John
>>>>>
>>>>>> On 04/19/2015 02:14 PM, Joe Martin wrote:
>>>>>>
>>>>>> On Apr 19, 2015, at 11:57 AM, Joe Martin wrote:
>>>>>>
>>>>>>>>>>
>>>>>>>>>> 7) when you run HPSDR Programmer do you see “Ethernet1" or
>>>>>>>>>> “Ethernet2” in the “Interface:” window in the “Computer Interface”
>>>>>>>>>> section of the display?
>>>>>>>>>
>>>>>>>>> I get "Local Area Network 1" or "Local Area Network 2" -- assume
>>>>>>>>> that's the same thing.  It shows the local machine MAC and IP address.
>>>>>>
>>>>>> Glenn,
>>>>>>
>>>>>> No, they aren’t the same thing.  They are two different ethernet ports.
>>>>>> You must be sure that your Metis is plugged into one or the other
>>>>>> (either directly or via an ethernet switch) and select that ethernet
>>>>>> port in the HPSDR Bootloader menu that shows the ethernet connections
>>>>>> that are available on your PC.  If you choose the wrong one Metis can’t
>>>>>> talk to the PC.  Try the other one, as a test, if you are unsure about
>>>>>> which to use.
>>>>>>
>>>>>> 73, Joe K5SO
>>>>
>>>
>>
>> _______________________________________________
>> HPSDR Discussion List
>> To post msg: hpsdr at openhpsdr.org
>> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
>> HPSDR web page: http://openhpsdr.org
>> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>>
>

 1429531333.0