[hpsdr] Diversity - OpenHPSDR mRX PS v3.3.6

[Scott Traurig]

Joe, 

I can confirm the requirement to cycle RX2 before diversity will work. It has been like this for many versions now. If RX2 is not cycled, with diversity enabled selecting RX2 in the diversity control panel shows the output of RX1 in the spectral display. It's almost as if diversity does not know to use ADC2 for RX2 until RX2 has been cycled on to off at least once.

73,

Scott/w-u-2-o


-------- Original Message --------
From: Joe Martin <k5so at k5so.com>
Sent: December 8, 2015 10:42:50 AM EST
To: Jim Barber <barberaudio at gmail.com>
Cc: "hpsdr at lists.openhpsdr.org list" <hpsdr at lists.openhpsdr.org>
Subject: Re: [hpsdr] Diversity - OpenHPSDR mRX PS v3.3.6

***** High Performance Software Defined Radio Discussion List *****

Hi Jim, 

Very interesting report.  In my initial investigation I see that with either HPSDR PowerSDR mRX PS v3.3.6 or HPSDR PowerSDR mRX PS v3.2.27 (probably others as well) a random phase shift is introduced between the two IQ streams if the RX2 button is activated any time after diversity mode has been opened/closed/reopened.  

As long as the RX2 button is not cycled (diversity mode off) the phase relationship between the two diversity IQ streams is maintained regardless of whether PowerSDR is shut down and restarted and/or the hardware is powered off (for at least 15 seconds!) and restarted.  The deep null settings are identical in these cases.  

Contrary to your stated process for bringing up diversity mode, you should NOT need to cycle the RX2 front panel button at all.  In fact, it seems that cycling the RX2 button introduces a random phase shift.  I will investigate this further but the issue does not appear to be associated with the new HPSDR PowerSDR version exclusively but rather seems to be associated with the use of the RX2 button on the front panel in between running sessions in diversity mode.  

To bring up diversity mode you need only power up HPSDR PowerSDR then click on the Diversity tab on the front panel, no use of the RX2 button should be required whatsoever; indeed, it appears that using RX2 before enabling diversity mode introduces a random phase shift between the two IQ streams, the source of which, admittedly, we need to understand.  

Hope this observation helps you in the short term. 

73, Joe K5SO

On Dec 7, 2015, at 8:38 PM, Jim Barber wrote:

> ***** High Performance Software Defined Radio Discussion List *****
> 
> A bug confirmation, I don't remember the original poster.
> 
> PowerSDR mRX PS v3.3.6
> Anan 100D
> Windows 10, AMD 1090T (6-core, 3.4 gHz)
> 
> To operate diversity here at least it's necessary to first:
> (1) Set RX2 to ADC2 if not already
> (2) Turn RX2 on, then off
> (3) Enable Diversity
> 
> It also seems that the the phase angle between receivers changes between program runs. IOW, if I null a noise source then close PowerSDR and reload it, the best null may be at a different phase angle.
> 
> I enjoy diversity a lot, since most of my operation these days is evenings on 160M. Without it, 160M is basically useless between power noise, plasma TV's and the like.
> 
> Thanks and 73,
> Jim N7CXI
> 

_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at openhpsdr.org
Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
HPSDR web page: http://openhpsdr.org
Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20151208/07f3c75a/attachment-0002.htm>