[hpsdr] Diversity - OpenHPSDR mRX PS v3.3.6

[Scott Traurig]

Hi Joe,

My configuration has ADC2 selected for RX2. So I'm afraid that is not the
issue.

73,

Scott

On Tue, Dec 8, 2015 at 11:32 AM, Joe Martin <k5so at k5so.com> wrote:

> Scott,
>
> Thanks.  That’s not my experience at all.  I normally have ADC2 selected
> for RX2 in the Setup > ADC menu as my default and never have to touch the
> RX2 button to bring up Diversity mode.
>
> I wonder if you were to set the ADC assignment as above then exit HPSDR
> PowerSDR so that the new setting gets written into the database.xml file,
> then bring up HPSDR PowerSDR again if you still need to use the RX2 button
> to bring up Diversity mode when running HPSDR PowerSDR?
>
> 73, Joe K5SO
>
> On Dec 8, 2015, at 9:23 AM, Scott Traurig wrote:
>
> > Joe,
> >
> > I can confirm the requirement to cycle RX2 before diversity will work.
> It has been like this for many versions now. If RX2 is not cycled, with
> diversity enabled selecting RX2 in the diversity control panel shows the
> output of RX1 in the spectral display. It's almost as if diversity does not
> know to use ADC2 for RX2 until RX2 has been cycled on to off at least once.
> >
> > 73,
> >
> > Scott/w-u-2-o
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20151208/f0db1f13/attachment-0002.htm>