[hpsdr] Diversity - OpenHPSDR mRX PS v3.3.6

[Joe Martin]

Hi Jim, 

RR, very good.  Among the primary purposes of the list are things exactly like this, in my view!  

If someone is annoyed he can exercise the option to unsubscribe.

73,  Joe K5SO

On Dec 8, 2015, at 9:37 AM, Jim Barber wrote:

> I wonder if I've complicated things by switching receiver->ADC assignments around regularly?
> Anyway, I'll work on it tonight around 1800 PST. With any luck I'll come up with something
> reproducible.
> 
> I'll post results back to the list unless someone finds the traffic annoying.
> 
> Thanks,
> Jim N7CXI
> 
> 
> On Tue, Dec 8, 2015 at 8:32 AM, Joe Martin <k5so at k5so.com> wrote:
> Scott,
> 
> Thanks.  That’s not my experience at all.  I normally have ADC2 selected for RX2 in the Setup > ADC menu as my default and never have to touch the RX2 button to bring up Diversity mode.
> 
> I wonder if you were to set the ADC assignment as above then exit HPSDR PowerSDR so that the new setting gets written into the database.xml file, then bring up HPSDR PowerSDR again if you still need to use the RX2 button to bring up Diversity mode when running HPSDR PowerSDR?
> 
> 73, Joe K5SO
> 
> On Dec 8, 2015, at 9:23 AM, Scott Traurig wrote:
> 
> > Joe,
> >
> > I can confirm the requirement to cycle RX2 before diversity will work. It has been like this for many versions now. If RX2 is not cycled, with diversity enabled selecting RX2 in the diversity control panel shows the output of RX1 in the spectral display. It's almost as if diversity does not know to use ADC2 for RX2 until RX2 has been cycled on to off at least once.
> >
> > 73,
> >
> > Scott/w-u-2-o
> 
>