[hpsdr] Diversity - OpenHPSDR mRX PS v3.3.6

[Brian D]

In my setup ADC2 is selected for RX2, but I also always have to cycle RX2 on
and off before diversity will work.


Joe Martin <k5so at k5so.com> wrote:

> ***** High Performance Software Defined Radio Discussion List *****
> 
> Scott,
> 
> Thanks.  That’s not my experience at all.  I normally have ADC2 selected
> for RX2 in the Setup > ADC menu as my default and never have to touch the
> RX2 button to bring up Diversity mode.
> 
> I wonder if you were to set the ADC assignment as above then exit HPSDR
> PowerSDR so that the new setting gets written into the database.xml file,
> then bring up HPSDR PowerSDR again if you still need to use the RX2 button
> to bring up Diversity mode when running HPSDR PowerSDR?
> 
> 73, Joe K5SO
> 
> On Dec 8, 2015, at 9:23 AM, Scott Traurig wrote:
> 
> > Joe,
> > 
> > I can confirm the requirement to cycle RX2 before diversity will work.
> > It has been like this for many versions now. If RX2 is not cycled, with
> > diversity enabled selecting RX2 in the diversity control panel shows the
> > output of RX1 in the spectral display. It's almost as if diversity does
> > not know to use ADC2 for RX2 until RX2 has been cycled on to off at
> > least once.
> > 
> > 73,
> > 
> > Scott/w-u-2-o
> 
> _______________________________________________ HPSDR Discussion List To
> post msg: hpsdr at openhpsdr.org Subscription help:
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org HPSDR web
> page: http://openhpsdr.org Archives:
> http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
> 
> 


-- 
Brian Duffell 
G3VGZ G8AOE
Yarm on Tees 
England