[hpsdr] PowerSDR mRx question

[Gerald Sitton]

I forgot to mention, I had to save mine before it kept the changes which seems odd.
Maybe a glitch in the software?? After doing this, as mentioned I went into the PA and set according to my setup.

> On Aug 22, 2016, at 6:05 PM, Gerald Sitton <gsitton at mac.com> wrote:
> 
> Hi Jim,
> 
> be sure to de select the box “use drive power”
> You will find this in the “transmit tab” on the left you will see the “Tune”
> below the meter setting is a selectable check box to use Drive Power. 
> Uncheck it and you will then be using the Tune power setting. 
> If you’ve already done this I apologize for the repeat of this step.
> Jerry
> 
>