[hpsdr] Pure Signal on ADC2?

[Warren C. Pratt]

Hi John,

I think that should work; however, which RX needs to be mapped to ADC2 
depends upon the radio model, in particular, which transceiver board is 
used in the radio.

Hermes-14bit:  RX1

Hermes-16bit:  RX3

Angelia:  RX4

Orion:  RX4

Hope that helps.

73,

Warren  NR0V

> It appears I have a hardware issue with my ADC1 hardware.  Signals 
> measure 10dB more IMD than the signal contains with two tone testing.  
> ADC2 is OK.
>
> I remapped RX1 to ADC2 as a temporary fix and moved my swapped the RX 
> connections.  I was hoping I would be enjoying the pleasures of Pure 
> Sig, but amp view only fills with noise.  Is there a way to route ADC2 
> to PS?
>
> Thanks,
>
> John
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20161126/9233d3eb/attachment.htm>