[hpsdr] Angelia_Protocol_2_v11.6/ANAN-100D firmware available for download

[Joe Martin]

All. 

New firmware for Angelia/ANAN-100D Protocol 2 is available for download from 

http://github.com/TAPR/OpenHPSDR-Firmware

Be sure to use the DOWNLOAD button on the web page to obtain the download; do NOT double-click on the file name nor right-click “Save As” to download the file as doing either of these latter two actions will not download the 1.8MB file.  

This firmware must be used with Thetis or other Protocol 2 software; not PowerSDR (which requires Protocol 1).  

This version adds peak detection to FWD_PWR (AIN1) and REV_PWR (AIN2) and speeds up user ADC conversion rates x10. It also modifies the PHY Rx clock skew timing to (hopefully) allow use of the firmware on more ANAN-100D radios with less undesirable unit-specific behavior.  The version also fixes the external PTT IN feature (pin 13 on the accessory jack of the ANAN-100D).  

73, Joe K5SO