[hpsdr] Angelia_Protocol_2_v11.6/ANAN-100D firmware available for download

[Joe Martin]

All, 

There appears to be some confusion.  The download button I refer to below is not the green “Clone or download” button you see on the top level of the OpenHPSDR-Firmware repository.  It is the button that appears after you select the Orion_Protocol_2_v11.6.rbf filename on the 

OpenHPSDR-Firmware > Protocol 2 > Angelia (ANAN-100D)  page. 

If you select the green button on the top level of the OpenHPSDR-Firmware page you will download the entire OpenHPSDR-Firmware repository, which is not what you want to do if you wish to obtain only the 1.8 MB Orion_Protocol_2_v11.6.rbf file.  

73, Joe K5SO


> On Apr 23, 2017, at 6:02 PM, Joe Martin <k5so at k5so.com> wrote:
> 
> ***** High Performance Software Defined Radio Discussion List *****
> 
> All. 
> 
> New firmware for Angelia/ANAN-100D Protocol 2 is available for download from 
> 
> http://github.com/TAPR/OpenHPSDR-Firmware
> 
> Be sure to use the DOWNLOAD button on the web page to obtain the download; do NOT double-click on the file name nor right-click “Save As” to download the file as doing either of these latter two actions will not download the 1.8MB file.  
> 
> This firmware must be used with Thetis or other Protocol 2 software; not PowerSDR (which requires Protocol 1).  
> 
> This version adds peak detection to FWD_PWR (AIN1) and REV_PWR (AIN2) and speeds up user ADC conversion rates x10. It also modifies the PHY Rx clock skew timing to (hopefully) allow use of the firmware on more ANAN-100D radios with less undesirable unit-specific behavior.  The version also fixes the external PTT IN feature (pin 13 on the accessory jack of the ANAN-100D).  
> 
> 73, Joe K5SO
> 
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/