[hpsdr] Angelia_v6.0 firmware for Angelia/ANAN-100D

[Michael Cozzi]

     Hi Joe,

     Thanks for the new firmware. Has the issue of ADC 2 overload during 
puresignal auto mode been addressed in this release?

     Did not see it in the release notes... and was wondering.

     Michael KD8TUT


On 11/30/2017 6:31 PM, Joe Martin wrote:
> ***** High Performance Software Defined Radio Discussion List *****
>
> All,
>
> Angelia_v6.0 firmware for Angelia/ANAN-100D (Protocol 1) is available for download from the GitHub repository:
>
> https://github.com/TAPR/OpenHPSDR-Firmware/tree/master/Protocol%201/Angelia%20(ANAN-100D)
>
> This version of firmware allows the user to change the Rx5 frequency during Tx or Rx when PureSignal mode is inactive.  As before, when PureSignal mode is enabled Rx5 is dedicated to providing rf feedback to the Orion board for PureSignal support during transmit mode.
>
> 73, Joe K5SO
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/