[hpsdr] rpi3 encoder input

[Scott Traurig]

Look in Menu > Radio. There you will find what you seek.

73,

Scott/w-u-2-o


On Mon, Feb 27, 2017 at 4:23 PM, K4KV <k4kv at k4kv.com> wrote:

> ***** High Performance Software Defined Radio Discussion List *****
>
> Hello,
>
> Just hooked up an interesting encoder from Marlin P Jones.  $20,
> supposedly 100ppr with knob and scale.
>
> However, before I get too far, the RPI3 program only changes 100Hz for 14
> or so detent 'pulses'.
>
> The program is set for 100 Hz steps.  One detent or two appears to do
> nothing.
>
> What might explain this is the fact the program is dividing the input by a
> 'config' amount first.
>
>
> I am asking so I do not have to drag the scope out and see what the
> encoder is actually doing.  A quick check
>
> of the menus did not seem to turn up a config value???
>
> 73
>
> Glen K4KV
>
>
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/lis
> tinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20170227/74881a8c/attachment.htm>