[hpsdr] High S meter reading on noise floor.

[H.A.Meijer]

Hi,


Is it not that there is an extra 6M preamp that can be calibrated out  
in the hpsdr powersdr software?.

73' Bert PA2XHF


Op 14-6-2017 om 10:41 schreef Isaac Weksler:
> ***** High Performance Software Defined Radio Discussion List *****
>
> Hi, all.
>
> The problem of incompatible readings of Avg Signal in Db and S-units is only
> on 6m band. I guess it's because of the attenuator set to 0Db on 6m (-20Db
> on the HF bands). Looks like the Db reading of the signal is taken before
> the attenuator and the S-reading after it.
>
> 73 Isaac 4Z1AO
>
> -----Original Message-----
> From: Hpsdr [mailto:hpsdr-bounces at lists.openhpsdr.org] On Behalf Of Warren
> C. Pratt
> Sent: Tuesday, June 13, 2017 4:08 AM
> To: hpsdr at lists.openhpsdr.org
> Subject: Re: [hpsdr] High S meter reading on noise floor.
>
> ***** High Performance Software Defined Radio Discussion List *****
>
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/