[hpsdr] Manual transmitter control on CW mode

[Joe Martin]

Yes, I agree that it seems likely to be a software problem rather than a firmware problem.  

Hopefully Doug can put addressing this issue on his “to do” list for us for the next PowerSDR release. 

73, Joe K5SO

> On May 26, 2017, at 3:07 PM, Bill Beam <wbeam at gci.net> wrote:
> 
> To be more specific:
> There is a check box to enable semi break in.  It has no effect.
> The program is stuck with break in always enabled.
> This appears to be an issue with PowerSDR.
> 73, NL7F
> 
> On Thu, 25 May 2017 18:37:39 -0800, Bill Beam wrote:
> 
>> The point made was that it is not possible to disable CW break-in. Whenever paddle is touched the rig
>> goes into transmit. PTT functions do work OK.
> 
>> I find this with my 200D, PowerSDR v 3.3.17, firmware 4.9.  I am unable to find a way to disable CW break-in.
> 
>> 73, NL7F
> 
>> On Thu, 25 May 2017 20:14:43 -0600, Joe Martin wrote:
s