[hpsdr] How to configure a hermes IP connection?

[WBR/WF4R]

I've responded direct to Jim with what he needs to do.

Just thought it would work better since I included  a bunch of screen captures.
 

73, Bill


WBR/WF4R
wbr at verizon.net




-----Original Message-----
From: Jim Lynch <jim at k4gvo.com>
To: HPSDR list <hpsdr at lists.openhpsdr.org>
Sent: Fri, Oct 27, 2017 3:59 pm
Subject: Re: [hpsdr] How to configure a hermes IP connection?

***** High Performance Software Defined Radio Discussion List *****

Just wanted to add a bit more information.  I have the board plugged 
into the LAN and I see the link light is solid and the activity light 
blinks intermittently.  There are a couple of red LEDs blinking on the 
board and a couple of others that are on. Definitely not getting an IP 
address from the router however.  I've power cycled it a couple of times 
with the ethernet cable connected just to see.  It didn't change 
anything.  There's nothing new in my devices list on the router.

Jim.
_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at openhpsdr.org
Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
HPSDR web page: http://openhpsdr.org
Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20171027/800da77c/attachment.html>