[hpsdr] How to configure a hermes IP connection?

[Scott Traurig]

You guys are making this **WAY** more complicated than it needs to be.

======================================================================================
Just set the radio back to either DHCP (IP = 0.0.0.0) or a fixed IP using
Bootloader and be done with it.
======================================================================================

If you have both the PC and radio connected to a source of DHCP then use
DHCP--this is the preferred setup.

If you have both the PC and radio isolated from the rest of the world
(directly connected either with a single cable or with a switch) you must
use fixed IPs on the same subnet on both the PC and radio.

If you have more than one NIC in your PC (and WiFi counts as one) then you
must set the Network Metric so that the NIC attached to the radio has a
lower Metric value (higher priority).

If none of this makes sense to you because you are not a Windows networking
guru, go here and find the instructions that will hold your hand through
the entire evolution:

https://apache-labs.com/community/viewtopic.php?f=6&t=2550

If you don't know how to use Bootloader, detailed instructions are here:

https://apache-labs.com/community/viewtopic.php?f=18&t=2333

73,

Scott/w-u-2-o
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20171028/ab6a6ef5/attachment.html>