[hpsdr] Thetis VAC problem VAC2 reserved for RX2

[Chris Gerber]

  No all ok on my Anan10 as with the normal HPSDR program the
Power display works ok so no HW problem

Chris



Am 18.04.2019 14:29, schrieb Scott Traurig:
>
> Simply use the pull-down menu on the TX meter to show Fwd Pwr.
>
> If you have no Fwd Pwr readings then it is possible the VSWR bridge on 
> the PA board is damaged. But the software works fine.
>
> On Thu, Apr 18, 2019 at 2:50 AM Chris Gerber 
> <chris.gerber at swissonline.ch <mailto:chris.gerber at swissonline.ch>> wrote:
>
>     ***** High Performance Software Defined Radio Discussion List *****
>
>       Hi All
>
>     Here it seems all VAC functions are more or less working.
>     But I am missing the Output Power readout on my Anan10
>     unit. It never shown it. Any news about that?
>
>     73, Chris HB9BDM
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20190418/c4cd4481/attachment.html>