[hpsdr] Thetis, new features.

[Scott Traurig]

Yes, on the 8000 there is PA voltage and current displayed both in
PowerSDR, Thetis and on the LCD front panel display.

73,

Scott

On Wed, May 15, 2019 at 9:38 AM Kjell Karlsen <la2ni at online.no> wrote:

> Hi Scott.
>
> Yes, it is marked in setup as valid for 7000 and 8000. The PA/ Filter
> board for -7000 has an output for PA current but according to Abhi it is
> not implemented yet. But someone must have done the modifications in Thetis
> and I would very much have it included!
>
> On the -8000 I believe the PA current is indicated on the small display on
> the front of the TRX?
>
> 73, Kjell
>
>
> På Wed, 15 May 2019 15:29:10 +0200, skrev Scott Traurig <
> scott.traurig at gmail.com>:
>
> Not sure that works on anything except the 8000, and maybe the 7000 (don't
> have on of those so can't say).
>
> 73,
>
> Scott
>
> On Wed, May 15, 2019 at 7:33 AM Kjell Karlsen <la2ni at online.no> wrote:
>
>>
>> På Wed, 15 May 2019 13:29:25 +0200, skrev Kjell Karlsen <la2ni at online.no
>> >:
>>
>> > Hi.
>> >
>> > I see that in the latest versions of Thetis, there is a new feature
>> that
>> > is indicating Volts/Ampere instead if CPU Load. I assume that this
>> mean
>> > the input voltage and PA current?
>> >
>> > But were is it meant that the voltage and current information should
>> be
>> > connected to the SDR card? As there are 2 analog inputs to J16 on all
>> > the ANAN SDR cards, I believe that the the information should be to
>> them?
>> >
>> > 73, Kjell
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20190515/8b2c2260/attachment.html>