[hpsdr] Pinocchio Updated

[Lyle Johnson]

>> I note that the pin 1 and pin 32 ends match for the male and female
>> parts, which seems a bit strange.  If you mate right angle connectors,
>> as I do on Pinocchio, then one of the connectors will be labeled
>> backwards.  I labeled the pins on the silkscreen to match ATLAS in a
>> "flow through" fashion, so the female connector used at "J1" at the top
>> of the PCB will have a mismatch between the connector marking and the
>> PCB marking..
> 
> I just checked the ones I've got (straight for the motherboard and RA 
> for the cards) and the numbers match OK on those when they are mated.

Mine match this way, too.  It is the right angle female that doesn't 
match, at least on the physical part I have.  Bt thew PCB silkscreen 
will be consistent with ATLAS and the signal flow, so we should be OK.

73,

Lyle KK7P


 1148759531.0