[hpsdr] Mercury: Insertion loss of analog HF filters

[pvharman at arach.net.au]

Thanks for all the feedback on this topic. Penelope all ready provides access 
directly to the DAC output so you can connect external filters etc or use the 
alias outputs for VHF/UHF use. 

We will look at adding a similar feature to Mercury.

73's Phil....VK6APH 



Quoting Tony Langdon <vk3jed at gmail.com>:

> ***** High Performance Software Defined Radio Discussion List *****
> 
> At 02:48 AM 4/20/2007, Chris Albertson wrote:
> >***** High Performance Software Defined Radio Discussion List *****
> >
> >
> >I'm hoping to be able to use Mercury as a general purpose
> >test equipment.  I might use the "TX" section as
> >a signal generator and the "RX" to drive an oscilloscope
> 
> I'm also interested in using Mercury/Penelope for other purposes, and 
> would like the ability to be tie directly into the ADC and DAC 
> respectively, as well as the ability to switch easily between the HF 
> transceiver mode and the "external device" mode.
> 
> There are a multitude of possible uses for this sort of arrangement, 
> from driving transverters, to test equipment, even providing LO 
> signals  and an IF for crystal controlled VHF/UHF equipment (i.e. a 
> DDS and IF for test purposes).
> 
> I'm all for enhancing the versatility.
> 
> 73 de VK3JED
> http://vkradio.com
> 
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at hpsdr.org
> Subscription help: http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org
> HPSDR web page: http://hpsdr.org
> Archives: http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/
> 




 1177028786.0