[hpsdr] All weather testing .... Ozy load

[Chris Albertson]

> TEST 3: Powered down ATLAS.
> Cycled power back to OZY
> Ran file: intozy.bat
> 
> Same error as Initial Run

Looks like re-loading that software had no effect.  Seems the first
failed attempt to
run the test leaves the hardware in a state that causes it to not fail
a second attempt.
At least you know that "something" before the failure was the thing
that set it up
for the second attempt.  Could be something so simple as tw commands
being to 
closely spaced in time, to the second one fails the 1st time, could be
a million other
things.

The normal debugging method is to search the source code for the words
in the
error message.  Then when you find the place in the code where the
error was
detected, figure out how yo got there either by inspection or getting a
debugger
to give a trace back.  (Sorry if this is obvious.)  Typically this kind
of error is caused
by an invalid (wild) pointer and the memory location itself is fine,
it's just that
the wrong location is being pointed to.

Good news is that you've proved that your HPSDR hardware works fine.



Chris Albertson
  Home:   310-376-1029  chrisalbertson90278 at yahoo.com
  Office: 310-336-5189  Christopher.J.Albertson at aero.org


       
____________________________________________________________________________________
Sick sense of humor? Visit Yahoo! TV's 
Comedy with an Edge to see what's on, when. 
http://tv.yahoo.com/collections/222

 1182222576.0