[hpsdr] OZY not invoking "found new hardware wizard"

[Philip Theis]

Bill,
Thanks for the response.
O/J is powered and lights are lit.
Only lights are power lights.
I assume the USB is 2 as the computer is only 1.5 years old, also tried on a
2 month old computer and same non result.
Also tried a second Ozy board with same non results.
Looking in the device manager, I don't see anything as the driver has not
been installed.  The method of installation is to connect the device and let
the wizard install the driver.
Thanks,
Phil K3TUF

-----Original Message-----
From: Bill Tracey [mailto:bill at ewjt.com] 
Sent: Tuesday, January 22, 2008 10:22 PM
To: Philip Theis; hpsdr at lists.hpsdr.org; flexradio at flex-radio.biz
Subject: Re: [hpsdr] OZY not invoking "found new hardware wizard"

Hi Phil,

Some basic questions:

Is Ozy/Janus powered?  5, 12, and -12 on the Atlas bus os used by Ozy 
and Janus, think you should only need +5 to get the PC to see it.

Do you get any LEDs on Ozy and Janus lit when powered up?  When you 
plug it into the USB socket?

Are you connecting it to a USB 2 port?   Ozy will need a USB 2 port 
-- don't know what it does if plugged into a USB 1.x port.

If you're looking in the device manager for it the VID should be 
0xfffe and the PID should be 0x7.

Bill (kd5tfd)

At 07:10 PM 1/22/2008, Philip Theis wrote:
>***** High Performance Software Defined Radio Discussion List *****
>
>I'm new to O/J and have them all fired up but when plugging in the USB
cable
>I am not getting the famous wizard.  I also tried scanning for hardware in
>the device manager.
>Suggestions please?
>Thanks
>Phil K3TUF



 1201061003.0