[hpsdr] OZY not invoking "found new hardware wizard"

[Joe - AB1DO]

Hi Phil,

I may be way off beat here, but it seems almost as if you do not have a 
driver installed for Ozy. I know that in the beginning, the LibUSB driver 
was used, but if I am not mistaken (Bill?), Ozy will currently also work 
with the Flex USBIO driver < 
http://support.flex-radio.com/Downloads.aspx?id=50 >. Try downloading the 
latter and installing it as Ozy's USB driver and see how that works.

73 de Joe - AB1DO

----- Original Message ----- 
From: "Philip Theis" <phil at k3tuf.com>
To: "'Bill Tracey'" <bill at ewjt.com>; <hpsdr at lists.hpsdr.org>; 
<flexradio at flex-radio.biz>
Sent: Tuesday, January 22, 2008 23:03
Subject: Re: [hpsdr] OZY not invoking "found new hardware wizard"


> ***** High Performance Software Defined Radio Discussion List *****
>
> Bill,
> Thanks for the response.
> O/J is powered and lights are lit.
> Only lights are power lights.
> I assume the USB is 2 as the computer is only 1.5 years old, also tried on 
> a
> 2 month old computer and same non result.
> Also tried a second Ozy board with same non results.
> Looking in the device manager, I don't see anything as the driver has not
> been installed.  The method of installation is to connect the device and 
> let
> the wizard install the driver.
> Thanks,
> Phil K3TUF
>
> -----Original Message-----
> From: Bill Tracey [mailto:bill at ewjt.com]
> Sent: Tuesday, January 22, 2008 10:22 PM
> To: Philip Theis; hpsdr at lists.hpsdr.org; flexradio at flex-radio.biz
> Subject: Re: [hpsdr] OZY not invoking "found new hardware wizard"
>
> Hi Phil,
>
> Some basic questions:
>
> Is Ozy/Janus powered?  5, 12, and -12 on the Atlas bus os used by Ozy
> and Janus, think you should only need +5 to get the PC to see it.
>
> Do you get any LEDs on Ozy and Janus lit when powered up?  When you
> plug it into the USB socket?
>
> Are you connecting it to a USB 2 port?   Ozy will need a USB 2 port
> -- don't know what it does if plugged into a USB 1.x port.
>
> If you're looking in the device manager for it the VID should be
> 0xfffe and the PID should be 0x7.
>
> Bill (kd5tfd)
>
> At 07:10 PM 1/22/2008, Philip Theis wrote:
>>***** High Performance Software Defined Radio Discussion List *****
>>
>>I'm new to O/J and have them all fired up but when plugging in the USB
> cable
>>I am not getting the famous wizard.  I also tried scanning for hardware in
>>the device manager.
>>Suggestions please?
>>Thanks
>>Phil K3TUF
>
>
> _______________________________________________


 1201100430.0