[hpsdr] Pennywhistle connections to Penelope

[Riho, ES7AAZ]

Hi Merv ,

Penelope schematic: 
http://hamsdr.com/data/GlobalFileUploads/19__PenelopeA1.pdf
All other HPSDR schematics, etc : http://hamsdr.com/dnld.aspx

Good luck !
Riho, ES7AAZ

Merv Thomas wrote:
> ***** High Performance Software Defined Radio Discussion List *****
>
> I will appreciate advice on what appears to me as an error on page 5 
> of the manual where it shows the connections from the DB25 connector 
> to the control connector on Pennywhistle.  It shows pin 13 on DB25 
> connected to pin 1 on Pennywhiste marking it as Bias Control when in 
> fact pin one is Gnd-I think it should be pin 2.
>
> I think I have smoked the FET on Penelope that controls PTT as PTT is 
> now always on.
>
> Can anyone tell me the FET number(Q1) so I may obtain a replacement?
>
> Thanks Merv VK6BMT.
>
> PS I think another small error in the manual is on page 10 4th para 
> where it refers to C12 which should read C21.
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: 
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>


 1260109331.0