[hpsdr] HPSDR / Transverters

K1rqg at aol.com K1rqg at aol.com
Wed Jan 7 21:10:12 PST 2009


 
 
Hi Bill
 
When configured for transverter, my example will be for 432 mhz and 28 Mhz  
IF,
the receiver works fine, the HPSDR does go to transmit mode when  commanded,
but there is no RF out of Peny. I have XVTRs set up the way I used to have  
it set
for the SDR-1000, 
 
Enabled, Band Button 0, UCB 0, Button Text 432, LO offset 404.0 LO error 0, 
Begin Freq 432.00, End freq 432.300, rx gain 0, RX only Not Checked, Power  
100,
XVTR RF TX not checked (but I have tried it checked as well)
 
Just no RF out of Peny under these conditions. Let me know how else I can  
help.
PA set at 38 db, drive = 100. 
 
73 de Joe

 
In a message dated 1/7/2009 10:50:57 P.M. Eastern Standard Time,  
bill at ewjt.com writes:

*****  High Performance Software Defined Radio Discussion List *****

I'd not  be terribly surprised if something was amiss here -- I've not 
tested the  transverter path at all (don't have any transverters here).

Can you  give me some more details on "no transmit"?  Radio produces 
and  error?   All seems fine with radio, but no RF from  
anywhere?  Something else?

Cheers,

Bill

At 02:09  PM 1/7/2009, K1rqg at aol.com wrote:
>***** High Performance Software  Defined Radio Discussion List *****
>
>
>
>I have been  using Peny/Ozy/Mercury interfaced to my 432 tranverter 
>for EME use at  28 MHz IF.
>I recently tried to use the XVTRs setup just to display the  proper 
>frequency, but I am not able to
>get Peny to drive the  transverter. Is anyone else using the XVTRs 
>interface successfully? I  seem
>to receive fine, but no transmit. All works fine when using 10  meters.
>
>Thanks in advance
>
>Joe  K1RQG


_______________________________________________
HPSDR  Discussion List
To post msg: hpsdr at hpsdr.org
Subscription help:  http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org
HPSDR web page:  http://hpsdr.org
Archives:  http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/




**************A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps! 
(http://pr.atwola.com/promoclk/100000075x1215047751x1200957972/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%26bcd=De
cemailfooterNO62)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20090108/f3a8a981/attachment-0003.htm>


More information about the Hpsdr mailing list