[hpsdr] Firmware Version and location

[Bill Tracey]

In general if you're going to play radio grabbing the .rbf and .hex 
from the PowerSDR tree is probably the best place to get it as that 
is the place that is regularly updated.  I tend to not update other 
consumers of the .rbf and .hex bits simply due to the work of having 
to test the other bits of code if I updated .rbfs or .hex's are  introduced.

In this case I think the new .rbf and .hex will work with the 
USBBlaster code so will update it next time I'm poking about in there.

Regards,

Bill

At 06:33 PM 6/1/2009, Richard Ames wrote:
>Bill & Phil,
>
>Could we action the below suggestion from John?  I know it has caused
>confusion for me.
>
>My suggestion would be to have one SVN location for the HPSDR software
>and possibly have different directories for the clients and the
>firmware.  Or possibly John's suggestion is best....
>
>I will write some wiki text to document what you decide to do....
>
>Richard.
>
>On Fri, 2009-05-29 at 09:08 +0100, John Melton wrote:
> > ***** High Performance Software Defined Radio Discussion List *****
> >
> > Just a warning if running my ghpsdr code and running initozy under Linux.
> >
> > Make sure you get the Ozy_Janus.rbf, ozyfw_sdr1k.hex from
> >
> > 
> svn://206.216.146.154/svn/repos_sdr_windows/PowerSDR/branches/kd5tfd/PennyMerge/bin/Release
> >
> > and do not use the versions in
> >
> > svn://206.216.146.154/svn/repos_sdr_hpsdr/trunk/USBBlaster-Binaries
> >
> > (Maybe we could update the versions in here so we have everything 
> together?)
><cut>



 1243919193.0